中国汉化 - www.shanse8.com

直接加微信

鼠标放在右下面微信图标上,会弹出微信二维码

扫描二维码访问中国汉化官网移动版

成就您每时每刻您所需要的

扫一扫,加微信好友

可直接咨询与求助

-->

国外CG作品赏析 第一期 Siek Box House [复制链接]

  • 12697阅读
  • 151回复
离线 fusion2010
楼主  发表于: 2012-10-15 只看楼主 倒序阅读
0F
最近我们在做一些国外优秀CG作品赏析的专题翻译,与论坛各位新老朋友分享,将会逐期发布,供大家学习交流。翻译不足之处,恳请指正。 ]$\|ktY!  
ZzBQe  
国外CG作品赏析 第一期 Siek Box House F0UVo  
原著:Rio Febrian  翻译:DM -+em!g'  
更多专题敬请关注 http://www.***** :4T("a5aM  
)& <=.q  
}Lw>I94e  
7 +@qB]Bi<  
EmT`YNuc  
3o|I[!2.  
M}wXJ8aF?  
译者:刚看到这个作品时,感觉特别享受,非常宁静,并且作者在植物的处理上也很自然、很到位,希望大家通过的我的翻译介绍可以学到一些东西。谢谢! &h,5:u  
<(e8sNe  
PSmfiaThwo  
CONCEPT AND WORKFLOW rBN)a"  
概念及工作流程 s $*'^:   
*$M'`vj:  
T=YzJyQC)  
I believe that the preparation and planning step is very important in every visualization project. I was imagining which environment would be good for this box house. I had a simple picture in my mind about a silent river beside the house, with many stones on the river. I used Linear Workflow for gamma setting in my scene, and I turned the gamma to 2.2. l#wdpD a{  
我相信在每一个可视化的项目里准备和规划步骤是非常重要的。我设想过怎么样的环境适才合表现这个Box house。在我的脑海中勾勒出一个简单的画面,一条幽静的小溪从房子旁边绕过,溪中沉寂着许多石头。在这个场景中,我使用了线性工作流配合GAMMA校正,GAMMA值为2.2。 pNE(n4v  
sF+=KH  
+tN &a  
k 2%S`/:  
MODELING !z zW2>  
建模 8S;CFyT\n  
;#G%U!p  
)J3kxmlzQ  
As I mentioned before, this model was provided by the organizer of this challenge. But I remodeled this whole part of the house because I wanted to put some details with chamfered edges on every corner edge. I believe in reality most of the corner edges around us are chamfered, not sharp like a knife. I also made some details like screw heads on the railing. g9my=gY  
如前面所说,这个模型是由组织本次活动的官方提供。但是我对这个建筑的一些部分还是做了一些修改,因为我想在这个模型的边缘加上一些倒角细节。我认为在现实环境中,这种细节会大量的存在,它并不会像刀子一样锋利。同样,我也加了一些细节在栏杆和扶手上。 ER{3,0U  
u>Ki$xP1  
w9#R'  
`HX3|w6W;  
|&hU=J o  
b5e@oIK  
".2A9]_s  
TEXTURING e4qj .b  
纹理 amB@N6*  
Ud3""C5B  
sS,#0Qt.  
Most of the textures that needed dirt, like the concrete wall, the window frame, railing, back-wall panel, pool andconcrete, used the VrayBlendMaterial. I used VRayDirt for the 1st and 2nd blend amount. But you have to swap occluded color and unoccluded color in it. One of the V-Ray dirt is normal, and the other one is invert normal, to put the dirt on both directions of corner (inside and outside). The last blend amount is for the leaking part at the bottom of the wall, I used a leaking texture from www.cgtextures.com. Many of textures in this scene came from there. Here are my material setting for concrete wall: t^@T`2jL  
大部分纹理都需要加一些污垢效果,像混凝土墙面,窗口框架,栏杆扶手,后壁板,水泥池子,使用的是VrayBlend材质,我使用VRay污垢贴图作为前Blend材质里的前两个混合。但是你必需交换一下VRay污垢贴图里的受阻色和非受阻色。其中之一的VRay污垢是正常的则另外一个也会是正常的,用来控制角落里两个方向上的污垢(里边和外边),最后一个Blend最后一个贴图是控制墙体底部污垢露出来的部分。我使用的纹理是从www.cgtextures.com网站上下载的,场景里的大部分贴图都来自这个网站,下图是是我的混凝土墙的材质设置。 L=7rDW)aa  
qiNliJ>40E  
AQci,j"  
w6EI{  
I needed to put different map channels for the dirt, so here are my UV mapping for the wall: kQ}s/*  
我需要在固有色贴图通道上添加一些污垢,以下是墙体的贴图UV d1NE%hg3  
`)tK^[,<W  
I used the same method for the railings, pool concrete, window frame and back panels textures. >RR<eYu7m  
我使用同样的方法对栏杆扶手,水泥池,窗框和后壁板纹理。 #,P(isEZ"  
l @A"U)A(  
zH+<bEo=1=  
Here is the ground material where I applied the VrayDisplacement modifier: &PWf:y{R`  
这儿的地面材质我添加了一个VRAY转换修改器 Y\u_+CG*  
ype"7p\  
e3rfXhp  
R`7n^,  
LIGHTING AND GI dM gbW<uAu  
灯光和全局照明 A[RN-R,  
T]X{ @_  
GFY-IC+fc  
In this scene I only used VRay Sun for the lighting. To get this kind of dusk mood, I put the sun at a very low angle and I increased the size multiplier to get blurred shadows. U;>B7X;`E4  
在这个场景里,我只使用了VRaySun作为照明,为了得到一个黄昏的调子,我将灯光的角度设置得非常低,并且我通过增加了VRaySun的size multiplier来得到模糊的阴影。 DoTs9w|5  
}9 FD/  
ec`>KuY  
9OhR4 1B  
Next, we have to define the environment background and GI. I used two slots for the material, one of them for the background, and one for lighting (GI). Both were made the same, but just in case I needed to make some changes, I made them in separate slots. For the environment background and GI, I used a mix of material between VraySky and Bitmap. The bitmap is a 360° sky bitmap that I downloaded from www.cgtextures.com, I choose the dusk one. I did many tests for this to define the mix amount (which one is better, close to the VraySky or close to the bitmap sky). In the bitmap, I also brought the RGB levels up to get the right level. Here is the mix: =G[ H,;W  
接下来,我必须去设置一下背景环境和全局照明。我使用了两个材质,一个是给背景,一个是给全局照明的。他们两的制作方法是一样的,但是以防万一,我需要做一些改变。我使他们相互不关联,在背景环境和全局照明里,我使用VRaySky和位图进行混合的材质,位图是360度的全景天空图片,也是从www.cgtextures.com上下载,我选择了一个黄昏的效果。我做了很多测试来调节他们的混合程度(哪一个更好,更接近VraySky或者是位图天空)。在这个位图里,我也调节RGB的级别来得到一个比较好的效果,下面就是这些设置。 n=r= u'oi  
78^Y;2 P]W  
`GP3 D~  
7!mJhgGc  
T?Z OHH8  
GRASS, PLANTS AND SCATTERING 8R BDJ  
草,植物和摆放 }t}38%1i  
I used models from iTree and Evermotion for the trees in this scene and of course I proxied them. For the grass I used models from iGrass, and then I scattered them using multiscatter and multipainter. I also painted some gravel on the ground. Here you can see the scatters I used: ?V.ig  
这个场景里我使用的模型来自iTree和Evermotion树库并且我将他们进行了代理。这些草我使用的模型来自iGrass,并用我用multiscatter和multipainter来摆放他们。我也绘制了一些碎石在地面上,下面你可以看到: pFS F[9?e>  
KPD@b=F  
aYqqq|  
(}VuiNY<3  
Main grass: ;CLR{t(N#V  
主要草植物 $0ym_6n  
C+}CU}  
(*LTq C  
s$Ic DuBu  
Field big-grass 1x^W'n,HtK  
场景里一些大的草植物: s{b0#[  
6nM rO$i0k  
=>E44v  
&Z;Eu'ia  
Galium plants <FMuWHY  
Galium植物 RlG'|xaT  
#JX|S'\x  
W$x K^}  
2gK p\!  
Gravel (I used the asteroid generator script to create many different shapes of stones): rd f85%%7  
碎石(我使用asteroid generator 脚本来创建很多形状不同的小石头) RXCygPT   
>?:i6&4o  
g[uE@Gaj&  
2=/-d$  
RENDERING $n_sGr  
渲染 G5X|JTzpu<  
}&'yt97+  
]J0Y^dM  
I rendered this scene with V-Ray, my favorite render engine. Here are the render settings: g]TI8&tP!L  
我使用VRay渲染这个场景,它是我最喜欢用的渲染器,下面是一些渲染设置。 {BwN4r46  
QjT#GvHY  
j2C^1:s@m  
YC+ZVp"v  
THE POST-PRODUCTION e>s.mH6A  
后期制作 !{|yAt9kP  
*? orK o  
Zzzi\5&gU  
In this post-production step, I used Photoshop and MagicBullet PhotoLooks. Actually this is not a heavy post production. I only did color corrections, added contrast, glow and fixed the saturation on grass. Here are the layer/steps: [Nzg 8FP  
这里的后期制作,我使用了Photoshop和MagicBullet PhotoLooks(注:调色插件“魔术子弹”)。其实这并不是一个很复杂的后期制作,我只做了一些颜色修正,增加对比度,辉光和草地饱和度的设置,下面就是调节的图层及步骤。 EXScqGa]  
+[go7A$5  
qy0_1xT-  
Original render . KSr@Gz  
最初渲染 ?}>B4Z)  
"{1}  
'}[L sU  
MyS7AL   
Darker water and stones 0 GLB3I >  
深色的水和石头 OCoRcrAx  
\< +47+  
IF21T  
${H&Q*  
Color correction and add contrast ~k_zMU-1  
颜色修正和增加对比度 Wn</",Gf  
)ejqE6'[  
%3B>1h9N  
g?Ty5~:lq  
Color correction and sharpening {Q3#]Vu  
颜色修正和锐化 3cQmxp2*  
w%u[~T7OI  
ZQ8Aak  
e?fjX-  
More sharpening on the gravel and stones area {.)~4.LhQM  
更多的锐化在碎石和石头区域 +*~3"ww<  
s8O+&^(U  
s'w 0pZqj  
a{6|[a R  
Reduce grass saturation :Bc;.%  
降低草的饱和度 :G)x+0u  
1Tkdr 2  
^(B*AE.  
c9k,Dc  
More contrast and sharpening on the left/foreground tree )&-+:u0  
调高对比度,加强左边背景树的锐化 &"0[7zgYQz  
4 ETVyK|  
zvg&o)/[  
mY9K)]8  
Adding sky glow )2hoO_l:  
添加天空光晕 BW[K/l~"$:  
?a(3~dh|  
HB:i0m2fJW  
-Ox HQ  
Adding a little bit fog using Z-depth 8&bj7w,K  
用Z-depth添加一小些雾效 yFqC-t-i  
^(3k uF  
%{"STbO#>  
Wi<Fkzj  
Add darker part at the bottom of the stones: d8I/7 ;F X  
将一部分石头底部加深 $G[##j2  
511q\w M  
@ Ia ~9yOY  
OJaU,vQ#  
As you can see, the post production for this scene is not complicated, it is only about adding contrast, color correction, and adding fog and glow. But the most important thing is to think creatively when we compose the image. $}@l l^  
正如你所看到的,对于这个场景的后期制作并不复杂,它仅仅只是增加对比度,颜色修正和添加一些光晕和雾效,但是最重要的事情是我们应该考虑怎么去添加合成这张图片 "]<Ut{Xb  
;N|6C+y  
P%c<0y"O:>  
Here are the wireframes for every single view that I posted before: I5mS!m/X  
这里是我之前发的一些单帧的模型线框图。 'Tn$lh  
ej~ /sO  
: SNp"|  
3c)LBM  
fg2}~ 02n  
P7 n~Ui~U  
Kxq~,g=t  
L_(|5#IDw  
Well, I hope you enjoyed this article, and may it help you in some way,Please feel free to ask if there are any questions. y(HR1v Q;Z  
很好,我希望你能喜欢这篇文章,并且能在某种程度上帮助到你,如果你有任何疑问请随时提问。 #8A|-u=3  
分享到
离线 micrisoft
发表于: 2012-10-15 只看该作者
1F
不得不说老外的细致程度我们是比拟不了的。 t56PzT'M  
光我们公司我想普及lwf 模式都困难受众比较小。。。
离线 z120
发表于: 2012-10-15 只看该作者
2F
很喜欢 /?g:`NT  
哈哈 S2EeC&-AR  
学习了
离线 song1987
发表于: 2012-10-15 只看该作者
3F
哇!在这里又见到了!哈哈  支持!是个好网站!
离线 sunzhigang
发表于: 2012-10-15 只看该作者
4F
好图 顶一个
发表于: 2012-10-15 只看该作者
5F
好图!好教程!顶一个!在膜拜三下 。。400万的面还能有40~60帧。。看来我的显卡也不行了,,呵呵   
离线 hunzhiqi
发表于: 2012-10-15 只看该作者
6F
真牛B
离线 wangzhenmeng
发表于: 2012-10-15 只看该作者
7F
牛逼啊
离线 zhuyiwen
发表于: 2012-10-15 只看该作者
8F
我靠这是神一级别的图片~!照片级~! W 9Vz[  
又是神一级别的帖子~带教程! sr+gD*@h  
不收对不起它也对不起楼主!
离线 395825767
发表于: 2012-10-15 只看该作者
9F
学习学习....
快速回复
限150 字节
温馨提示:严禁胡乱恶意回复帖子,违者严惩,严重者封号!
 
上一个 下一个
      你的浏览器不支持js脚本,无法发帖,请修改浏览器设置,支持js脚本并刷新页面后再发帖!
      欢迎光临中国汉化网

      登录后更精彩!

      下拉
      使用快捷登录 或 免费注册